Close
Folex Film and Paper Coating in Swiss Quality
Folex Film and Paper Coating in Swiss Quality
Folex Film and Paper Coating in Swiss Quality
Folex Film and Paper Coating in Swiss Quality
  • Countries
  • Languages
  • Search

Switzerland

back to selection

FOLAJET SI UV

Silver metallic polyester film for the production of high resolution photographic poster prints, point of sale, industrial graphics, nameplates and mirror effects. It offers superior ink adhesion, water and wet smear resistance as well as good light stability.The film is ideally suited for demanding applications where ink adhesion on flexible surfaces is an important factor.

ls_verpackung_001High resolution (Download)

Rolls

Art. Number

Base/Nominal
thickness (mm)

Width
(mm)

Length
(m)

20930.100.392000.10091430Technical Datasheet
20930.100.322000.100127030Technical Datasheet
Pictogram Piezo

Suitable for Piezo printers

Pictogram UV Ink

Suitable for UV Ink

Pictogram Curing Dry

UV Curing coating

Pictogram Wasserfest

Improved water resistance

Articlenr. 20930.100.39200

Characteristic

  • Suitable for Piezo printers

  • Suitable for UV Ink

  • UV Curing coating

  • Improved water resistance

  • Good scratch resistance

  • Good ink absorption

  • Good ink adhesion

  • Light-fast and wet smear resistant prints

  • Brilliant high resolution colour prints

Finish

  • Silver / mirror effect

Specifications

Icon Bullet

Coating frontside

For Ink Jet UV

Icon Bullet

Print side

Slightly matted, rougher side

Icon Bullet

Base material

Polyester

Icon Bullet

Width (mm)

914

Icon Bullet

Length (m)

30

Icon Bullet

Width (inch)

36

Icon Bullet

Length (ft)

98.43

Icon Bullet

Base/Nominal thickness (mm)

0.100

Icon Bullet

Base/Nominal thickness (mil)

4

Icon Bullet

Packing quantity

1

Compatibility

  • Useable on most large format Ink Jet printers using solvent UV curing ink systems.

  • Not recommended for printing with oil, solvent or water based inks.

Handling

  • A preconditioning period of 24 hours within the printing environment is recommended.

  • Between 15-30°C and 30-70% r.h.

  • Lamination: cold or heat laminates (low-temp) possible but not necessary due to water-proof prints.

  • Heating system in printer possible up to approx. 45°C. Higher temperature may cause film deformation

  • Avoid fingerprints on printing side.

Storage

  • Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).

  • Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Folex AG

Bahnhofstrasse 92
CH-6423 Seewen
Schweiz

Phone +41 41 819 39 39

Fax +41 41 810 01 35

RecommendPrint Version
Webdesign by Screenlight - Content Management by CMS Toolpark pc3